Hard Nickel Plated 48 Pitch Pinion 40 Teeth
Overview Boost acceleration, out-of-the-corner punch, and run time, by installing an 16-tooth pinion gear with the stock 83-tooth spur gear, or ins...
View full details
Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)
Screws, 3x10mm cap-head machine (hex drive) (6)/ lock washers (6)/ hex wrench
Exhaust pipe,rubber/ metal support tubes (2)/ metal fitting tube(1)
Battery hold-down (gray) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad
Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link...
View full details
Turnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741A for complete camber lin...
View full details
Turnbuckle, aluminum (red-anodized), camber link, rear, 49mm (1) (assembled with rod ends & hollow balls) (See part 3741X for complete camber l...
View full details
Screws, 4x10mm button-head machine (hex drive) (6)
Spur gear, 56-tooth (0.8 metric pitch, compatible with 32-pitch)
Spur gear, 62-tooth (0.8 metric pitch, compatible with 32-pitch)
Gear set, close ratio (1st speed gear 21T, 18T input gear)
Input shaft/ drive gear assembly (18-tooth steel top gear)
Nuts, 5mm flanged nylon locking (aluminum, blue-anodized) (4)
