R/C Car/Truck - Parts

Hard Nickel Plated 48 Pitch Pinion 40 Teeth

26T 48P ALUM PRO PINION

Wheel hubs, 12mm hex (2)/ stub axle pins (2)

Turnbuckles, 36mm (2)

Overview Boost acceleration, out-of-the-corner punch, and run time, by installing an 16-tooth pinion gear with the stock 83-tooth spur gear, or ins...

Tie bar, fiberglass

Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)

Exhaust pipe,rubber/ metal support tubes (2)/ metal fitting tube(1)

Battery hold-down (gray) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad

Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link...

Turnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741A for complete camber lin...

Turnbuckle, aluminum (red-anodized), camber link, rear, 49mm (1) (assembled with rod ends & hollow balls) (See part 3741X for complete camber l...

Springs, rear (white) (2)

Spur gear, 56-tooth (0.8 metric pitch, compatible with 32-pitch)

Spur gear, 62-tooth (0.8 metric pitch, compatible with 32-pitch)

Gear set, close ratio (1st speed gear 21T, 18T input gear)

Output gear, 33-tooth (1)/ spacers (2)

Input shaft/ drive gear assembly (18-tooth steel top gear)

Ball bearings (5x8x2.5mm) (8) (for wheels only)

Ball bearings (6x12x4mm) (2)

Pressure rings, slipper (notched) (2)

Skidplate, front plastic (black)/ stainless steel plate