D29 - R/C Hardware

Screws, 2.5x12mm countersunk machine (hex drive) (6)

Screws, 2.5x10mm countersunk machine (hex drive) (6)

PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)

Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)

Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)

E-clips/ C-rings

Backplate screws (3x8mm cap-head machine) (6)/washers (6)/ wrench

Shoulder screws, 3x16mm (2)

Header screws, 3x23mm cap hex screws (6)

Screws, 3x30mm button-head machine (hex drive) (6)

Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)

Screws, 4x15mm button-head machine (hex drive) (6)

Attachment screws, shock (3x12mm shoulder screws) (6)

Body clip (mounting clip), angled, 90-degrees (10)

Ball screws (3x12mm) (lower shock attachment screws) (6)

Screws, 3x10mm flat-head machine (hex drive) (4)

Screw pin, 2.5x18mm (6)

Screws, set (grub) 4mm (6) (with threadlock)

Rings, retainer (snap rings) (14mm) (2)

Spacers, steel (Jato® Twin-Spoke wheels, front) (4)

Screw pins, 4x13mm (with threadlock) (4)

Screws, 3x12mm countersunk machine (6) (hex drive)

Screws, 3x15mm countersunk machine (6) (hex drive)

Screws, 3x23mm roundhead machine (6)