TRAXXAS

Driveshaft, steel constant velocity (shaft only, 109.5mm) (1) (replacement shaft for #8996X)

Servo horn, steel

Screws, 3x12mm countersunk machine (6) (hex drive)

Screws, 3x15mm countersunk machine (6) (hex drive)

Screws, 3x23mm roundhead machine (6)

Body clips (12)

Overview Traxxas offers a complete selection of 48-pitch spur gears for performance tuning.

Bulkhead (front) (black)

Ring gear, differential/ pinion gear, differential (rear)

Axle carriers, left & right (2 each)

Half-shafts (internal-splined (2)/external-splined (2))/ metal U-joints (4)

Wheel hubs, 12mm hex (2)/ stub axle pins (2)

Turnbuckles, 36mm (2)

Overview Boost acceleration, out-of-the-corner punch, and run time, by installing an 16-tooth pinion gear with the stock 83-tooth spur gear, or ins...

Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)

Screws, 3x10mm cap-head machine (hex drive) (6)/ lock washers (6)/ hex wrench

Collars, screw (2)/ grub screws, 3mm (2)

Exhaust pipe,rubber/ metal support tubes (2)/ metal fitting tube(1)

Battery hold-down (gray) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad

Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link...

Turnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741A for complete camber lin...

Turnbuckle, aluminum (red-anodized), camber link, rear, 49mm (1) (assembled with rod ends & hollow balls) (See part 3741X for complete camber l...

Springs, rear (white) (2)

Screws, 4x10mm button-head machine (hex drive) (6)