TRAXXAS

Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right)

Camber link set for Bandit® (gray) (plastic/ non-adjustable)

Front axles (2)/ 4mm nylon locknuts (2)

Gear, 26-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Overview Boost acceleration, out-of-the-corner punch, and run time, by installing an 16-tooth pinion gear with the stock 83-tooth spur gear, or ins...

Gear, 21-T pinion (48-pitch) / set screw

Wing wire

Planetary gear differential (complete)

Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel

Slipper tension spring/ spur gear bushing & locknut

PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)

Carriers, stub axle (red-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware

Carriers, stub axle (rear) (2)

Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4)

Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)

Turnbuckles (54mm) (2)/ 3x6x4mm aluminum spacers (rear camber links)

Wedges, anti-squat (1.5 & 3.0 degree) (2 each)

Gear, 18-T pinion (48-pitch) / set screw

Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)

Shock shafts, hardened steel, titanium nitride coated (long) (2)

Shock shafts, steel, chrome finish (long) (2)

Wheel hubs, 12mm hex (blue-anodized, lightweight aluminum) (2)/ axle pins (2)

E-clips/ C-rings

Backplate screws (3x8mm cap-head machine) (6)/washers (6)/ wrench