TRAXXAS

Turnbuckles, 116mm (rear toe control links) (2) (includes installed rod ends and hollow ball connectors)

Header, aluminum (T-Maxx®) (for rear exhaust engines only) (TRX 2.5, 2.5R, 3.3)

Turnbuckles, toe links (5.0mm steel) (front) (2)

Screws, 3x15mm cap-head machine (hex drive) (with split and flat washers) (6)

Screw pin, 2.5x18mm (6)

Nuts, 5mm flanged nylon locking (steel, serrated) (8)

Spacers, steel (Jato® Twin-Spoke wheels, front) (4)

E-clips, 1.5mm (24)

Half shafts, center (front and rear) (external-splined (2)/ internal-splined (2))/ metal U-joints (4)

Drive cups, inner (2) Revo®/ E-Revo® (first generation)/ T-Maxx®/ E-Maxx (steel constant-velocity driveshafts)/ screw pin, M4/15 (2)

Drive cups, inner (2) Revo® (steel constant-velocity driveshafts)/screw pin, M4/15 (2) (for use only with 5333R adjustable wheelbase rear suspensio...

Cover plates and seals, forward only conversion (Revo®) (Optidrive® blank-out plate, Optidrive® sensor cover, shift fork cover) These seals cover a...

Nuts, 2.5mm nylon locking (12)

Box, receiver (upper and lower halves)/ clip (1)/ foam pad

Engine mount, aluminum/ 3x10 CS with washers (8)

Suspension screw pin set, hardened steel (hex drive)

Stub axle, (1)/ axle sleeve (1) Revo®/T-Maxx®/E-Maxx (steel constant-velocity driveshaft)

Slide carb linkage bellcrank post/ 5x8x2.5 plastic bushing (2)/ bellcrank/ 5x8x0.5 fiber washer (2)/ 3x10 WM

Slide carb linkage set (throttle link, brake link, and hardware)

Pull string, recoil starter (TRX® 2.5, 2.5R)

Pull handle, recoil starter/ shock absorber (TRX® 2.5, 2.5R)

Ball bearings, blue rubber sealed (6x13x5mm) (2)

Ball bearings, blue rubber sealed (20x27x4mm) (2)

Ball bearing, black rubber sealed (20x27x4mm) (2)