TRAXXAS

Ball bearing, black rubber sealed (20x27x4mm) (2)

Unleash Unmatched Power and EfficiencyTransform your driving experience with the 5184 Output Shaft Transmission, the ultimate upgrade for those who...

Tires, rubber (2) (fits Traxxas® wheelie bar wheels)

Screw pins, 4x13mm (with threadlock) (4)

Single-speed conversion kit (Eliminates two-speed mechanism for reduced weight, less rotational mass)

Ball bearing, black rubber sealed (20x32x7mm) (2)

Clutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

Ball bearings, 7x17x5mm (1)/ 12x21x5mm (1) (TRX® 3.3, 2.5R, 2.5 engine bearings)

Rod, connecting (TRX® 2.5, 2.5R, 3.3)

Head protector, cooling head (2) (TRX® 2.5, 2.5R)

Gaskets, cooling head: 0.15, 0.25, 0.35mm (1 each) (TRX® 2.5, 2.5R)

Piston/sleeve (matched set), wrist pin clips(2) (TRX® 2.5, 2.5R)

Wrist pin/ wrist pin clips (2) (TRX® 2.5, 2.5R)

Carburetor body/ fuel inlet plug/ 5x.9mm O-ring (1-each) (TRX® 2.5, 2.5R, 3.3)

Wrist pin clips (3) (TRX® 2.5, 2.5R, 3.3)

End cap, carburetor body/ 6.2x1.2mm O-ring/ (1-each) (TRX® 2.5, 2.5R, 3.3)

Screw, idle speed/ 2x1mm O-ring (1-each) (TRX® 2.5, 2.5R, 3.3)

Dust boot, throttle (2)/ return spring (TRX® 2.5, 2.5R, 3.3)

Flywheel nut (TRX® 2.5, 2.5R, 3.3)

Pipe coupler, molded (black)/ exhaust deflecter (rubber, black)/ cable ties, long (2)/ cable ties, short (2)

Needle assembly, high-speed (with fuel fitting)/ 2.5x1.15mm O-ring (2)/ 5.3x7.8x.6mm crush washer (2) (TRX® 2.5, 2.5R, 3.3)

Needle, low-speed/ 2x1mm O-ring (2) (TRX® 2.5, 2.5R, 3.3)

Carburetor, complete (minus air filter assy.) (TRX® 2.5, 2.5R, 3.3 composite slide)