TRAXXAS

Motor mount, finned aluminum (for 550 motors)

Cover, gear/motor plate access cover/ motor mount hinge post / 3x10mm CS w/split and flat washers (1) / 2.5x4mm CS (2) / 3x8mm BCS (1) (for 550 mot...

Plate, motor (for 550 motor)

Differential locker, (2)

Body mounts, front & rear/ body post, rear (1)

Box, receiver (sealed)/ foam pads/ 2.5x12mm CS (2)/ 3x6mm CS (2)/ 3x12mm BCS (2)

Battery hold-down (1)/ hold-down retainer, front & rear (1 each)

Bulkhead, front (for use only with #6723R chassis) Front bulkhead fits vehicles equipped with the 6723R chassis. Replacement part for these models:...

Bulkhead, front

Turnbuckles, camber link, 49mm (63mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)

Turnbuckles, Camber Link, 49mm (73mm Center to Center) (assembled with Rod Ends and Hollow Balls) (1 Left, 1 Right)

Body bumper, foam (low profile) (use with #7435 front skidplate)

Skidplate, front (angled for higher ground clearance) (use with #7434 foam body bumper)

Linkage, steering

Spring, shock, white (GTR long) (0.623 rate orange) (1 pair)

Spring, shock, white (GTR long) (0.767 rate black) (1 pair)

Spring, shock, white (GTR long) (0.810 rate pink) (1 pair)

Driveshaft, center, plastic (black)/ screw pin

Springs, rear (white) (progressive rate) (2)

Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

1/10 scale GTR shocks represent the peak of suspension technology. The hard-anodized aluminum shock bodies are coated with PTFE for the slickest da...

Shocks, GTR long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

1/10 scale GTR shocks represent the peak of suspension technology. The hard-anodized aluminum shock bodies are coated with PTFE for the slickest da...